Industrial Valve

APPLICATION - 
Resideo RVC Series balanced 2-position hydronic valves are used in domestic and small commercial heating and cooling applications to control the flow of hot and/or cold water.
They consist of an actuator, valve and a cartridge assembly 2-way valves are designed for on-off zone control of domestic systems.
3-wayvalves can be piped for either diverting or mixing valve applications in domestic central heating and/or cooling systems.
SPECIAL FEATURES -
• Rugged design.
• Control by a low or line voltage SPST or SPOT controller.
• Minimal actuator power consumption.
• Pressure differential up to 4 bar.
• Double insulated actuator.
• Quick connect electrical connections.
• Quick and easy replacement of moving parts.
• Actuator head installation does not require draining of the system.
• High flow rate capacity

Check valves / Non- Return valves normally allow fluid to flow through one direction. Check valves operate automatically and cannot be controlled externally.

• Tyroflo Valves are designed and manufactured as per ASME B16.34/API 6D/ BS EN 17292. These Standards Cover Pressure Temperature ratings, minimum shell thickness, bore diameter for each size/class
• Castings inspection as per MSS SP 53, 54, 55, 59, 93 & 94
• Actuator mounting pad on the valve is as per ISQ 5211

Thermostatic expansion valves series TMVL are used in general refrigeration and for original equipment. Plants with one or more refrigerant circuits such as refrigerated cabinets even with cramped mounting conditions, ice and cream machines, milk cooling systems, cold stores, air conditioning systems and heat pumps.

V5433 3 way Rotary Valves used in HVAC system.For heating and air conditioning; hot/cold water quality VDI2035; glycol water mixture 50%.

APPLICATION - 
Thermostatic mixing valves of this type are used for central regulation of the water temperature in solar-powered, bivalent water heaters. A cold water break can be fitted in the circulation line in water heater systems, which prevents cold water from mixing at the extraction point via the circulation line.

SPECIAL FEATURES - 
• Highly sensitive thermal element with good all-round water temperature sensing, even at low flow rates.
• Scald protection - the hot water inlet is automatically cut off if the cold supply fails provided that the hot water inlet temperature is at least 10 K higher than that of mixed water setting.
• The cold water inlet is automatically cut off if the hot supply fails.
• Simple setting of the required water temperature.
• Inner components are of scale-resistant materials.
• Meets UBA regulations for drinking water.